Short answer: chimney leaks are flashing failures. The metal system that seals the roof-chimney junction eventually corrodes or pulls loose — and because generations of quick fixes reach for caulk instead of metal, many older Puget Sound chimneys are wearing a crust of failed sealant over failed flashing. The durable repair rebuilds the metal.
Why this junction fails first
A chimney punches through the roof plane and stands independent of it — the house settles, framing expands, masonry doesn't move in sync. Meanwhile the roof sheds its water around the obstruction, concentrating flow exactly where the joint is. It's the hardest-working seal on the roof, engineered as a two-part system so each layer can move slightly without breaking the other: step flashing woven shingle-by-shingle up the sides, and counter flashing set into the mortar joints above, lapping down over the steps.
How it actually fails
- Corrosion — decades of Puget Sound moisture eventually win against the metal, especially older galvanized steel.
- Mortar joint separation — counter flashing pulls free as mortar ages, leaving a gap that faces the sky.
- The caulk archaeology — each prior owner's tube of sealant, stacked in layers, each one a temporary patch that made the junction harder to repair properly. We see it weekly on older Seattle homes.
- Missing cricket — wide chimneys need a small diverter roof on their uphill side; without one, water and debris pond against the back face.
The real repair
Rebuild, don't recoat: new step flashing woven into the courses, new counter flashing ground into the mortar joints and sealed, a cricket where dimensions call for one. Done properly, the junction outlasts the shingles around it — which is also why chimney flashing should be automatically renewed during any roof replacement on an older home. It's a standard part of our repair work across Seattle and the Eastside.
Stains on the ceiling near your chimney? Get it diagnosed free, with photos: (425) 270-1525.
